| |
|
|
|
|
|
GX Screw conveyor is a general-purpose screw conveyor,it applicablity of strong,fleexible inlet and outlet layout position with low noise easy operation and maintenance. It has S-type(with the of the spiral screw)and D system (with spiral belt ,or can be used to tilt the level(less than 20oC)transport all kinds of powder,granular and small block materials,such as pulverized coal,flour,cement,sand,bulk grain,such as small lump coal and stone.Temperature of their working environment ad 20degrees to+50 degrees,the transportation of materials should be lower than the temperature of +200degree.Main parameters of the table below.
GX series screw conveyor main technology parameter list:
|
機器型號Model |
GX150 |
GX200 |
GX250 |
GX300 |
GX400 |
GX500 |
GX600 |
|
螺旋直徑Screw diameter(mm) |
150 |
200 |
250 |
300 |
400 |
500 |
600 |
|
螺距Screw pitch(mm) |
120 |
160 |
200 |
240 |
320 |
400 |
480 |
|
轉速Speed(rmp) |
31-129 |
31-114 |
31-102 |
31-88 |
31-88 |
31-75 |
31-59 |
|
輸送量Conveying capacity(m3/h) |
1.3-5.5 |
3.1-11 |
6-20 |
10-30 |
25-71 |
49-118 |
85-162 |
|
許用千瓦轉速比The KW allowable speed ratio |
0.013 |
0.03 |
0.06 |
0.1 |
0.25 |
0.48 |
0.85 |
|
許用懸臂載荷Allowable load cantilever(kg) |
210 |
370 |
580 |
800 |
1500 |
2400 |
3500 |
|
注：表中的輸送量按填充系y=0.45考慮，選型時請根據具體物料選取填充系數yc對輸送量進行修正。
Note:The capacity in the table is considered with the filling factor y=0.45.Accirdubg to the specific materials ,please select the filling factor y to amend. | |
|
|
|
|
