| |
|
|
|
|
|
MC (RMC, GSZ) series of en mass conveyor
|
MC (RMC, GSZ) Series of en mass conveyor comprise two form:the vertical layout conveyor and the tilt angle conveyor.The inclination angle is 30℃≤a≤90℃.The width of the trough is up to 12500mm, the largest carrier caacity ie 33t/h,The maximun lift height is 30m.The advantages of this machine are small in size and more flexible in layout .We can also produce the hermetic model.
Main technical parameters：
|
機器型號Model |
MC16 |
MC20 |
MC25 |
MC32 |
MC40 |
MC50 |
MC63 |
MC80 |
MC100 |
MC125 |
|
機槽寬度trough width(mm) |
160 |
200 |
250 |
315 |
400 |
500 |
630 |
800 |
1000 |
1250 |
|
鏈條速度chain speed(m/s) |
0.16-0.25 |
0.16-0.25 |
0.6-0.32 |
0.2-0.40 |
0.2-0.40 |
0.2-0.45 |
0.2-0.5 |
|
輸送量convering capacity(t/h) |
4-9 |
7-12 |
12-22 |
22-41 |
28-70 |
62-150 |
75-178 |
95-240 |
120-290 |
125-330 |
|
最大提升距離the maximum elevating distance（m） |
30 |
28 |
25 |
|
注：表中物料按如下條件計算，物料——小麥，容重r=0.75t/m3,選型時請根據具體物料進行修正。
Note:Materials in the table are wheat.The bulk density r=0.75t/m3,Specific amendments base on selection of materials. | |
|
|
|
|
