HS Series scraper conveyor is conveying powder, small particles and small block of continuous dry materials conveying machinery and equipment, can be level , tilt arrangement . The device structure is reasonable , stable and reliable operation , transmission Ju long distance , good sealing performance , low abrasion , noise, Di , Guang Fan used in metallurgy, power, chemical, mining , building materials and other industries.
Structural characteristics and working principle of :
HS Series scraper output machine parts from the nose , the middle tank , tail parts, scraper conveyor , drive system, the composition of the bolster beam installation . All closed case , equipment run-time without material leakage ; conveyor processing of high grade alloy forging parts by heat treatment, strength, wear resistance ; devices expected out of , transport length can process requires a flexible design layout.
Materials, equipment, feed by mouth evenly into the bottom of the tank , from tail to head from the direction of continuous operation for closure of the bearing scraper conveyor the material evenly from the inlet continuously transported to the discharge port . Enables more feed, more discharge . Tail set screw adjustment device to adjust the tightness of conveyor chains , to ensure its proper operation and always maintain tension in the state , so that the device is in a stable state of operation.
HS Series scraper conveyor specifically for large mill cut , piled higher than major powder , small particles and small block the delivery of dry materials , such as iron works sintering dust .
Technical parameters:
| Project Type |
HS200 |
HS250 |
HS310 |
HS400 |
HS450 |
HS500 |
|
Slot (mm) |
200 |
250 |
310 |
400 |
450 |
500 |
|
Transmission capacity (m3/ H) |
2-5 |
4-8 |
6-12 |
10-15 |
15-20 |
20-25 |
|
Chain speed (m / min) |
2.4-4 |
2.4-4 |
2.4-4 |
2.4-4 |
2.4-4 |
2.4-4 |
|
Chain pitch (mm) |
152.4 |
152.4 |
152.4 |
200 |
200 |
200 |
|
Transmission distance (m) |
5-60 |
6-60 |
8-50 |
8-50 |
8-50 |
8-50 |
|
Transmission slope (o) |
≤ 15 |
|
Motor power (Kw) |
1.5-5.5 |
1.5-7.5 |
2.2-11 |
3-11 |
4-15 |
4-18.5 |
|
Driver Installation Type |
Left, right equipment , back -loading |
|
Transmission Type |
Chain drive |
|
For particle size (mm) |
< 5 |
< 8 |
< 12 |
< 15 |
< 20 |
< 20 |
|
For humidity (%) |
≤ 5 |
|
For temperature (oC) |
≤ 150 |
